Artafon Installation Instructions
Artafon PG 05 – PIPE DIFFUSER AND ENGINE GUARD 2020 MODELS KTM HUSQVARNA EXC TE 2T TPI 6 fixing points – 2 steel handles at the back, aluminum handle with two screws at the front and two screw fixing to the sockets in the frame. Internal brackets positioning the guard in the correct position relative to the diffuser, frame and engine. Lightweight, tailored to the shape of the diffuser and frame, so as not to accumulate mud and stones. Large drain hole at the lowest point. All double sided welds. Made of reinforced aluminum PA11 / AlMg3 / 4mm thick Fits ONLY with the new (not bent/demaged) OEM diffuser (not FMF DEP etc…) Protects the diffuser, caps, starter and engine. Tested in the most difficult conditions.
KTM HUSQVARNA 2t 4t 2020 MODELS Installation without the cutting of cables and hose. Complete set for two radiators with fan, ideally suited. Protect radiators against bending and impacts from the front and side. Guards are very solid and tough, inner support deny at the frame and are fixed to it. Made from hard aluminum PA11 / AlMg3 / thickness 4mm.
KTM HUSQVARNA 2t 4t 2020 models Complete set for two radiators , ideally suited. Protect radiators against bending and impacts from the front and side. Guards are very solid and tough, inner support deny at the frame and are fixed to it. Made from hard aluminum PA11 / AlMg3 / thickness 4mm.
KTM HUSQVARNA 2t 4t 2020 MODELS Installation without the cutting of cables and hose. Complete set for two radiators with fan, ideally suited. Protect radiators against bending and impacts from the front and side. Guards are very solid and tough, inner support deny at the frame and are fixed to it. Made from hard aluminum PA11 / AlMg3 / thickness 4mm.
KTM HUSQVARNA 2t 4t 2020 models Complete set for two radiators with fan, ideally suited. Protect radiators against bending and impacts from the front and side. Guards are very solid and tough, inner support deny at the frame and are fixed to it. Made from hard aluminum PA11 / AlMg3 / thickness 4mm.
KTM HUSQVARNA 2t 4t 2020 models Complete set for two radiators with fan, ideally suited. Protect radiators against bending and impacts from the front and side. Guards are very solid and tough, inner support deny at the frame and are fixed to it. Made from hard aluminum PA11 / AlMg3 / thickness 4mm.
RG01 – RADIATOR GUARDS for KTM/HUSQVARNA 2T and 4T MODEL 2017 COMPATIBLE also with SPAL and Trail Tech FAN (Set not fan included) Complete set for two radiators with fan, ideally suited. Protect radiators against bending and impacts from the front and side. Guards are very solid and tough, inner support deny at the frame and are fixed to it. Made from hard aluminum PA11 / AlMg3 / thickness 4mm.
Diffuser guard for KTM HUSQVARNA 250/300 EXC TE 2T MODEL 2017, 2018 TPI Protects the pipe, engine, the starter and caps, Ideally suited and tested. Light, tailored to the shape of the diffuser and the frame, so as not to accumulate mud and stones, additionally the drain hole in the lowest point. Internal brackets position and maintain the cover in correct position. Includes screws and washers. Made from hard aluminum PA11 / AlMg3 / thickness 4mm. Fits with OEM diffuser. Matched, tested.
RG01 – RADIATOR GUARDS for KTM/HUSQVARNA 2T and 4T MODEL 2017 COMPATIBLE also with SPAL and Trail Tech FAN (Set not fan included) Complete set for two radiators with fan, ideally suited. Protect radiators against bending and impacts from the front and side. Guards are very solid and tough, inner support deny at the frame and are fixed to it. Made from hard aluminum PA11 / AlMg3 / thickness 4mm.
RG02 – RADIATOR GUARDS for KTM/HUSQVARNA 2T and 4T MODEL 2017 For models without fan. Complete set for two radiators with fan, ideally suited. Protect radiators against bending and impacts from the side. Guards are very solid and tough, inner support deny at the frame and are fixed to it. Made from hard aluminum PA11 / AlMg3 / thickness 4mm.
SP01 – skid plate for KTM/HUSQVARNA(SP01H) 250 300 2T model 2017 Protects the engine, the starter and caps, Ideally suited and tested. Made from hard aluminum PA11 / AlMg3 / thickness 4mm. Includes screws and washers.
SP02 – skid plate for KTM/HUSQVARNA(SP02H) 250 350 4T model 2017 Protects the engine, the starter and caps, Ideally suited and tested. Made from hard aluminum PA11 / AlMg3 / thickness 4mm. Includes screws and washers.
Gas Gas EC 250 300 2018 Link guard link skid , shock suspension guard. Ideally suited and tested. Made from hard aluminum PA11 / AlMg3 / thickness 8mm.