P.RKT.YA250.99on

Yamaha YZ250 1999-On Top End Rebuild Kit – TSP

A (for new barrels and first piston change)
£134.00
£134.00
Skip to product information
P.RKT.YA250.99on
  • P.RKT.YA250.99on
  • P.RKT.YA250.99on
Yamaha YZ250 1999-On Top End Rebuild Kit – TSP

Yamaha YZ250 1999-On Top End Rebuild Kit – TSP

£134.00
£134.00
Piston Size
This TSP top end rebuild kit will suit Yamaha YZ250/YZ250X models from 1999-On. Images shows the parts you will receive. It includes:
  • Piston kit in the size of your choice (A or B). Piston kit includes rings, pin, circlips and a high quality cast piston with anti-friction coating. These pistons are made by Meteor in Italy and are THE BEST available. Occasionally we will need to supply a different brand if we are out of stock. In this case we will contact you and usually offer Wossner or Pro X as a replacement.
  • Top end gasket kit. Packed especially for TSP. Includes a selection of base gaskets, powervalve cover gaskets, copper washers and O rings… all O rings are the correct size and made from the correct material, unlike the cheaper aftermarket kits.
  • TSP packaged little end bearing. Made in Japan.
TSP rebuild kits are put together by TSP using parts sourced direct from OEM manufacturers in Japan and Europe. The parts we select are THE BEST available for each make/model and many are the exact same parts as the genuine items. All TSP rebuild kits are kept in stock at TSP. Piston sizing: ideally you should measure your bore with a dial gauge to work out the correct piston sizing. If you cannot do this then a rough rule of thumb is use an A size under 100 hours of engine run time and use a B size over 100 hours of engine run time. Its ALWAYS better to have a bit too much clearance than not enough, so if in doubt use an A size.

You may also like